Oppo New boot unlocked by test point

🎆BOOOM 🎆 🎆 BOOMM 🎆🎆  BOOOOM🎆

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

 

World First A83 2018, f5 , f5 youth , f9 New boot unlocked by test point (tested myself on December security patch )

 EVERYONE KNOW THAT ALL OPPO MODEL NEED AUTHORIZED USER ID AND PASSWORD

  

 

 

I AM HERE TO SHOW THAT HOW TO UNLOCK YOUR OPPO ALL MODEL WITH MRT,UFI,MIRACLE, CM2 DONGLE 

1.  Know Your Mobile Model 

2.  You Need To Open Your handset(It should avoid your service warranty)

3.  Here Is Your Test Point for Describe Model  

4.     for oppo a83 (cph179)

   

     for oppo f5 (cph1723,cph1725,cph1728)
   

   

    for oppo f9 (cph1823, cph1881)
   

   

      for oppo a3s (cph1803) test point

   

   Short The Given Point To The Ground 

5. After That Connect to Usb Cable 

🔥🔥🔥🔥SEE THE MAGIC🔥🔥🔥🔥

  Note : Given Procedure Will Definitely AVOID Your Service Warranty

               🌷🌷🌷🌷🌷🌷 BY SHARMA MOBILE 🌷🌷🌷🌷🌷🌷

                                     WHATSAPP :+91951363847

    

IF YOU HAVE ANY PROBLEM 

FEEL FREE TO COMMENT

FRP RESET FILE OF ANY SPD CPU

FRP Remove On All SPD /Spreadtrum in Just One Click......

 Here[step by step Guide]

1. Power off the mobile.

2. Go to recovery Mode ( using first press Power Key then immediately press Volume down Key or some mobiles need Power Key and press Volume up key. don’t release Volume key until see the Android logo or Recovery mode) 

    

3. After fastboot mode ,then Connect to the computer

   (if you have no driver in your pc then you need to install driver And here is your driver)

    

   https://www.mediafire.com/file/vpsf4phb99zgtn5/fastboot_gadget_driver_by_sharma_mobile.rar/file

    

4. After successfully install driver open this tool

   (http://www.mediafire.com/file/u272bhkntdaqwhj/spd+fastboot+frp+reset+tool+by+sharma+mobile.rar)   

   pasword :Sharma Mobile

   

    

    

5. And then Press 9 

6. Hit Inter

   Your Mobile Reboot Automatically

   Done 

   Now your mobile doesn't want any google id 

          By Sharma Mobile

       whatsapp:+919851363847

   
   

 

 

😊😊😊😊😊😊😊😊Hot😍Hot😍Hot😊😊😊😊😊😊😊

oppo all model (a3s realme 2 realme  pro a2 a83) flashing unlocking available here with remote service at very low cost 

contact on whatsapp 9851363847

on email : sharmamobileburdwan@gmail.com

How to flash Samsung Stock/Official ROM via Odin

FLASHING STOCK ROM VIA ODIN WILL DEFINITELY WIPE YOUR DATA. SO MAKE BACKUP FIRST.

FLASHING STOCK ROM VIA ODIN WILL DEFINITELY WIPE YOUR DATA. SO MAKE BACKUP FIRST.

 

 Step 1: Download and install device driver software on your computer.

 https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows 

 

Once drivers are installed or updated, it is recommended that you restart your computer.

 

Step 2: Download and extract the Stock ROM (Official/Original Firmware).

https://www.sammobile.com/ 

After downloading it (normally a compressed file), you need to extact/unzip it to certain location of your PC. The file types that Odin uses are *.bin,*.tar and *.tar.md5.

 

Step 3: Download and extract Odin on you PC.

https://odindownload.com/SamsungOdin/#.XAusaB_hXIU 

 

Step 4: Boot your Samsung device into Download mode.

Follow these steps to enter Download Mode/Odin Mode

1. Power off your device
2. Press and hold Volume Down key, Home Key and Power Key
3. When your device vibrates, release Power key while keep holding the Volume Down key and Home key

4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)

Step 5: Connect your device to PC.

You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant).

Device is connected to Odin.

Step 6: Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".

Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP".

Add *.md5 to Odin.

After adding the file, click "Start" to begin the flashing process.

Click "Start" to flash.

WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.

Ongoing flashing process. Do not remove your device.

When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.

Flash succeeded.

If failed, what should you do?

Try these things first:

• Update your device driver software to the latest.
• Restart your computer.
• Run Odin as Administrator.
• Try different cable (original one or the one with better quality) and USB port (the main port recommended)
• Re-download the firmware file, make sure it is intact and match your device model

NOTE:SAMSUNG AND SAMSUNG ONLY. THIS IS A GENERAL GUIDE. NO GUARANTEE ON ANYTHING. DO IT AT YOUR OWN RISK.

THANKS
    😎😎 SHARMA MOBILE😎😎

How to flash MTK Android dead phone with SP Flash tool?  

GUIDE FROM SHARMA MOBILE

 

  SP Flash tool, also know as SmartPhone Flash tool is a popular freeware tool used to flash custom ROM or firmware in MTK Android phones. It is a very successful tool and is extremely easy to use. 

Let us look at the steps given below to learn how to flash dead Android phone using PC with the help of SP Flash tool.  

Step 1: To start with, download and install the MTK driver on your on your PC and then download the ROM/firmware you wish to use for flashing purpose

Step 2: Once done, you should download the SP Flash tool and extract it on your PC and move on to launch the Flash_tool.exe file to open the SP Flash tool window

Step 3: Now, on the SP Flash tool window, click on “Download” and select “Scatter loading”

Step 4: The last step would be to locate the file downloaded by you and click “Open” and then finally, select “Download” on the SP Flash tool window. 

After completing the above steps, connect your dead device to the PC with a USB cable and wait for it to get recognized. The flashing process will take a few minutes to finish and then you will you will see a green circle indicating “OK Download”.

That's it! Now simply disconnect your phone and wait for it to reboot

 

Here is your letest version SP Flash tool

https://spflashtool.com/download/ 

Here is your MTK Flashing driver

https://drive.google.com/file/d/1zVsZGouGj_rtuiqoyQLxnRQ4xQJKVT3Z/view?usp=sharing 

NOTE:Flash your gadgets at your own Risk

THANKS 😎😎😎😎😎😎 

      😊😊SHARMA MOBILE😊😊

              PURBA BURDWAN

 

 

 

 

Oppo Realme 2 Stock Firmware,Pattern lock,Gmail account lock Solution Here

Here is file

RMX1801_11_A.05_180926_598934c8

https://drive.google.com/file/d/1m3-lEhHp59Mc-ke0zj3akZyDDZQwnDYv/view 

RMX1803_11_A.06_181002_3e88c08c

https://drive.google.com/file/d/11c749HS2ZIY8Ki6yPmySVB4xHRLrRZQ2/view 

RMX1805_11_A.16_181017_4225587c

https://drive.google.com/uc?export=download&confirm=H0-m&id=10q6mUboVRg5-_7bVDV_RoJJHbh77xXv4 

 

oppo f9 (CPH1881,CPH1823) pattern unlock SOLUTION with flash tool

HERE IS YOUR FLASH FILE
https://www.mediafire.com/file/u4ttak38ue941fa/CPH1823_11_A.05_180817_a1f19367%28Repairmymobile.in%29.rar

NOTE:FLASHING MAY AVOID YOUR SERVICE WARRANTY



IF YOU HAVE ANY PROBLEM THEN MAIL ME  
 

oppo cph1729 flashing using tool

  Flash file download now
https://drive.google.com/file/d/1Wokrxfrihj13uMiWUPcGOAxBC-XxHlPx/view

Note:flashing your phone at your own risk